TIPS for

•  At highway speeds, wind can get under or around the cover, causing it to flap.  This can scratch, scuff, or rub the gel coat, windows, or fittings, sometimes badly enough to require repair. 
•  If the cover rips off, it becomes a road hazard and can cause accidents or legal issues. 
•  Straps or loose parts could damage other vehicles or cause you to lose control. 
•  Tearing a cover during trailering means replacing or repairing it—an avoidable expense. 

• DO NOT install your winter cover with any canvas (bimini tops, enclosures, mooring covers, etc.) still installed. 
• Cause damage to canvas and framework due to added pressure. 
• Trap moisture, increasing the risk of mold, mildew, or corrosion.
• Compromise the fit and integrity of the winter cover.
   

Always remove all canvas and ensure the boat is dry before installing a winter cover for safe and proper off-season storage.

•  Try to hose of saltwater after every outing.
• Clean with fresh water and mild soap every month or so depending on climate and use, to keep debris and dirt from setting.                
• Canvas should be cleaned thoroughly every 3-5 years.
  Canvas Connection offers this service.

• Regularly rinse salt spray and debris.
• Periodically clean with a soft cloth or old T-shirt (not paper towel) with mild soap and warm water.
• Also clean with an Isenglass clear cleaner such as Klear to Sea or 210, both sold at Canvas Connection. 

• When storing be sure all canvas is thoroughly dry to prevent mold and mildew.
• Lay any panels flat with a towel in between to prevent zippers from lying on clear 

• Rips or tears
• Worn stitching 
• Broken zippers or snaps
• Repair before storing to avoid further damage or forgetting next season.

• Never stack or roll vinyl windows against themselves—use soft cloths or microfiber in between to prevent scratches.
• Store flat when possible and avoid temperature extremes.

• Avoid damp garages, sheds, or attics. 
• If storing in a boat locker, make sure it’s clean, dry, and rodent-free.